The process of repairing a garage door can seem to be an arduous task. However, with continued use, the garage door is likely to become worn out and in need of repairs. Most of the common repair problems arise from the springs. You need to understand how you can go about carrying out the garage door repairs yourself so that you can save on costs.
Determine the Correct Springs
The garage door springs carry the most weight on the door. When they get worn out, it means that your door will not function properly. Depending on the weight of your door, you need to get the correct springs in order to replace the worn out ones. Checking and replacing the springs is a dangerous task and you should exercise extreme care. The easiest way to determine the type of springs you need is to check their colour. Most are often colour coded meaning you just need to check the colour and make your order. However, should you not be comfortable with this method, you should weigh the door.
Weighing the Garage Door
The weight of the springs can help you determine which springs to get for the garage door repair. It is more effective than relying on the colour of the springs. Over time, your door may add more weight from moisture and paint. This might even result in the faster wear and tear of your springs. Therefore, it is important to measure the door. If it is a single door, you should place the scale in the middle. If it is a double door, you should use two scales that are placed equal distance from each other. The readings from the double doors should be added so that you can have an idea of the strength the new springs need to support.
Replacing the Springs
Once you have determined the type of springs you need, the next step is to install them. You need to ensure that you have the right tools. These include vice grips, a ruler, an adjustable wrench and a ladder. To ensure that you indeed have the correct springs, you should measure the existing ones and compare them with the new ones. If you are satisfied, you should then move on to replacing them. You can do this by setting up the ladder to access the springs, and unhinging them slowly. Once the old springs are out you should install the new ones and try to see if the garage door works. If it does not, there are many garage door repair professionals in Australia who can help you with the problem.